Home › Drivetrain › P314 HYBRID TRANSMISSION / TRANSAXLE › SHIFT LEVER POSITION SENSOR
RM2040EQ _52 Drivetrain _014701 P314 HYBRID TRANSMISSION / TRANSAXLE _0074953 SHIFT LEVER POSITION SENSOR A

P314 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 53852K 1.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

Hide 51442C 2.REMOVE ENGINE UNDER COVER LH

Hide 53851Z 3.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

Hide 51441C 4.REMOVE ENGINE UNDER COVER RH

Hide 33820B 5.SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY

a.
A268022

Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.


b.

Using a screwdriver, disengage the 4 claws and disconnect the transmission control cable assembly with clip from the No. 1 transmission control cable bracket.


c.

Remove the clip from the transmission control cable assembly.


Hide 89451 6.REMOVE SHIFT LEVER POSITION SENSOR

a.
C243621

Disconnect the connector from the shift lever position sensor.


b.
C243622

Remove the nut, washer, and control shaft lever from the manual valve shaft.


c.
C243623
1.531,1.125 1.427,1.49 1.427,1.49 1.323,1.49 true 1.167,1.406 1.354,1.615 0.188,0.208 10 true *1
*1 Lock Plate


Using a screwdriver, pry the tabs of the lock plate.


d.
C243624
1.698,1.333 1.521,1.75 1.521,1.75 1.438,1.75 true 1.938,1.01 2.219,0.729 2.219,0.729 2.302,0.729 true 2.333,0.646 2.5,0.802 0.167,0.156 10 true *1 1.26,1.667 1.427,1.823 0.167,0.156 10 true *2
*1 Lock Nut
*2 Lock Plate


Remove the lock nut and lock plate from the manual valve shaft.


e.
C243625

Remove the 2 bolts and pull out the shift lever position sensor from the manual valve shaft.