Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER › 2012.02–2015.04
RM2040EQ _53 Suspension _014705 FRONT SUSPENSION _0074966 FRONT SHOCK ABSORBER A

FRONT SUSPENSION  FRONT SHOCK ABSORBER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.LOOSEN FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT

a.
C238965

Loosen the front support to front shock absorber nut.

NOTICE:
·

Do not remove the front support to front shock absorber nut.

·

Loosen the front support to front shock absorber nut only when the front shock absorber with coil spring needs to be disassembled.




Hide 89543 3.SEPARATE FRONT SPEED SENSOR

a.
C246176

Remove the bolt and clamp, and separate the front speed sensor and front flexible hose from the front shock absorber assembly.

NOTICE:

Be sure to separate the front speed sensor from the front shock absorber assembly completely.



Hide 48810 4.SEPARATE FRONT STABILIZER LINK ASSEMBLY

a.
C242672

Remove the nut and separate the front stabilizer link assembly from the front shock absorber assembly.

If the ball joint turns together with the nut, use a hexagon wrench to hold the stud bolt.


Hide 5.REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING

a.
C265513C02
2.729,1.875 2.135,1.688 false 2.479,2.99 2.74,1.875 false 0.958,1.979 1.448,1.979 false 0.792,1.917 1.104,2.073 0.313,0.156 10 false *1 2.802,1.823 3.115,1.979 0.313,0.156 10 false *2
*1 Jack
*2 Wooden Block
V100135

Front of the Vehicle


Support the front axle using a jack and wooden block.


b.
C247228

Remove the 2 bolts and 2 nuts, and separate the front shock absorber with coil spring (lower side) from the steering knuckle.

NOTICE:

When removing the nuts, keep the bolts from rotating.



c.
C238964

Remove the 3 nuts and front shock absorber with coil spring.

NOTICE:

Make sure that the front speed sensor is completely separated from the front shock absorber with coil spring.



Hide 6.REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT

a.
C267414
2.458,1.119 2.766,1.119 false 2.787,1.037 3.106,1.200 0.318,0.163 10 SST

Secure SST in a vise.

SST
09727-30021  (09727-00010, 09727-00021, 09727-00031)


b.
C275706C01
0.323,0.167 0.719,0.563 0.396,0.396 10 false *a 0.354,2.479 0.677,2.781 0.323,0.302 10 false *b
*a Correct
*b Incorrect


Attach the arms of SST to the diameter of the front coil spring.

CAUTION:
·

Make sure that the front coil spring is installed so that the distance between the upper and lower arms of SST is at the maximum.

·

Make sure that the claws of the arms are securely attached.




c.

Using SST, compress the front coil spring.

CAUTION:
·

If the front coil spring bends during compression, immediately stop compression and reinstall SST.

·

Do not excessively compress the front coil spring so that the coils contact each other.

·

Do not use an impact wrench. It will damage SST.




d.
C267415

Confirm that the front coil spring is free and remove the front support to front shock absorber nut.

CAUTION:

Do not remove the front support to front shock absorber nut when the front coil spring is not free.



Hide 48609 7.REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY

Hide 48609C 8.REMOVE FRONT SUSPENSION SUPPORT BEARING

Hide 48471C 9.REMOVE FRONT UPPER COIL SPRING SEAT

Hide 48157C 10.REMOVE FRONT UPPER COIL SPRING INSULATOR

Hide 48132 11.REMOVE FRONT COIL SPRING

Hide 48331C 12.REMOVE FRONT SPRING BUMPER

Hide 48158C 13.REMOVE FRONT LOWER COIL SPRING INSULATOR

Hide 48520 14.REMOVE FRONT SHOCK ABSORBER ASSEMBLY