Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE LINE
RM2040EQ _54 Brake _014709 BRAKE SYSTEM (OTHER) _0074985 BRAKE LINE L

BRAKE SYSTEM (OTHER)  BRAKE LINE  PRECAUTION  


NOTICE:
·

Since the brake lines are classified as critical safety related parts, be sure to disassemble and inspect the components if any brake fluid leaks are found. If any abnormality is found, replace the component with a new one.

·

When removing brake system components, cover the brake line connections to prevent foreign matter such as dust or dirt from entering the lines.

·

Do not allow brake fluid to adhere to any painted surface such as the vehicle body. If brake fluid leaks onto any painted surface, immediately clean it off.

·

When installing a grommet to the body, ensure that the brake line passes through the center of the grommet.

·

Do not damage or deform the brake lines when removing and installing them.

·

When installing a brake line or flexible hose, ensure that they are free from twists or kinks.

·

Do not deform the bracket or the body when connecting a brake line and flexible hose.

·

If the cap of a flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.

·

Flexible hoses must be free from shock absorber oil, grease, etc.

·

When installing a brake line to a plastic clamp, ensure that the brake line is not loose or pinched.

·

Do not reuse any clips or plastic clamps removed from a flexible hose.

·

After installing a brake line or flexible hose, ensure that they do not interfere with any other components.

·
C102779
0.958,1.406 0.958,1.781 false 1.729,0.896 1.604,0.667 1.604,0.667 0.969,0.667 false 2.198,3.49 2.198,4.052 false 3,3.073 3,3.531 false 0.083,0.094 0.396,0.438 0.313,0.344 10 false *A 0.104,2.427 0.427,2.781 0.323,0.354 10 false *B 0.875,1.771 1.083,2.01 0.208,0.24 10 false *a 0.802,0.573 1.021,0.844 0.219,0.271 10 false *b 2.104,4.031 2.344,4.26 0.24,0.229 10 false *a 2.927,3.531 3.135,3.76 0.208,0.229 10 false *b
*A Disconnecting
*B Connecting
*a Hold
*b Turn


When disconnecting and connecting a flexible hose and brake line:

1.

Hold the flexible hose with a wrench and disconnect the brake line using a union nut wrench without deforming the line.

2.

Remove the clip.

3.

Install a new clip.

4.

Connect the brake line with a union nut wrench without deforming the line.


·
C238442
1,0.927 0.802,0.594 0.802,0.594 0.688,0.594 false 2.146,0.656 2.146,0.885 false 1.781,2.052 1.521,1.771 1.521,1.771 1.292,1.771 false 0.531,0.49 0.771,0.729 0.24,0.24 10 false *a 1.135,1.688 1.396,1.917 0.26,0.229 10 false *1 2.063,0.885 2.281,1.104 0.219,0.219 10 false *b
*1 Way
*a Hold
*b Turn


When connecting a brake line and way:

1.

Support the way to prevent deformation of the brake line and connect the brake line to the way with a union nut wrench.

2.

Support the way to prevent deformation of the brake line and install the bolt to secure the way to the body.