Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL
RM2040EQ _54 Brake _014709 BRAKE SYSTEM (OTHER) _0074987 BRAKE PEDAL A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL  REASSEMBLY  


PROCEDURE

Hide 47131 1.INSTALL STOP LIGHT SWITCH CUSHION

Hide 47101B 2.INSTALL BRAKE PEDAL BUSHING

a.
C247878
1.156,1.042 1.229,1.021 false
V100145

Lithium Soap Base Glycol Grease


Apply a light layer of lithium soap base glycol grease to 4 new brake pedal bushings.


b.

Install the 4 brake pedal bushings to the brake pedal sub-assembly.


Hide 47124A 3.REMOVE BRAKE PEDAL SHAFT COLLAR

a.

Install the 2 brake pedal shaft collars to the brake pedal sub-assembly.


b.

Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the 2 bolts and 2 nuts.

Torque:
23 N*m (239 kgf*cm, 17 ft.*lbf)


Hide 47121 4.INSTALL BRAKE PEDAL PAD

a.

Install the brake pedal pad to the brake pedal support assembly.