Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER PUMP
RM2040EQ _54 Brake _014709 BRAKE SYSTEM (OTHER) _0074989 BRAKE BOOSTER PUMP N

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER PUMP  DISPOSAL  


PROCEDURE

Hide 47070 1.DISPOSE OF BRAKE BOOSTER PUMP ASSEMBLY

a.

Remove the accumulator from the brake booster pump assembly.


b.

Secure the accumulator in a vise.


c.
C212399
2.073,1.792 2.615,2.083 0.542,0.292 10 A 1.708,1.792 2.083,2.021 0.375,0.229 10 B

Using a hacksaw, make a cut in the side of the accumulator at location A to release the high-pressure gas.

Location Length
A 25 mm (0.984 in.)
B 60 mm (2.36 in.)

CAUTION:

Small pieces of metal may fly out when cutting into the accumulator. Put a cloth over the hacksaw when cutting the accumulator. Cut the accumulator slowly so that the gas will be released gradually.


HINT:

The gas is colorless, odorless and non-poisonous.