Home › Brake › BRAKE (FRONT) › FRONT BRAKE
RM2040EQ _54 Brake _014710 BRAKE (FRONT) _0074990 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE CYLINDER BOOT

a.
C239579
1.781,1.469 2.021,1.708 2.021,1.708 2.188,1.708 false 2.219,1.615 2.479,1.844 0.26,0.229 10 false *1
*1 Vinyl Tape


Using a screwdriver with its tip wrapped with vinyl tape, remove the front disc brake piston set ring and cylinder boot from the disc brake cylinder assembly.

NOTICE:

Be careful not to damage the front disc brake piston or front disc brake cylinder.



Hide 47731 2.REMOVE FRONT DISC BRAKE PISTON

a.

Place a piece of cloth between the front disc brake piston and front disc brake cylinder.


b.
C238491

Apply compressed air to remove the front disc brake piston from the front disc brake cylinder.

CAUTION:

Do not place your fingers in front of the front disc brake piston when using compressed air.


NOTICE:

Do not allow any brake fluid to spatter.



Hide 3.REMOVE PISTON SEAL

a.
C132807
1.5,0.521 0.615,0.521 false 0.458,0.438 0.75,0.708 0.292,0.271 10 false *1
*1 Vinyl Tape


Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the front disc brake cylinder.

NOTICE:

Do not damage the inner surface or piston seal groove of the front disc brake cylinder.



Hide 31478B 4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 47547B 5.REMOVE FRONT DISC BRAKE BLEEDER PLUG