Home › Brake › PARKING BRAKE › PARKING BRAKE SYSTEM
RM2040EQ _54 Brake _014712 PARKING BRAKE _0074994 PARKING BRAKE SYSTEM N

PARKING BRAKE  PARKING BRAKE SYSTEM  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT PARKING BRAKE PEDAL TRAVEL

a.

Fully depress the parking brake pedal to engage the parking brake.


b.

Depress the pedal again to disengage the parking brake.


c.
C233618

Slowly depress the parking brake pedal using the specified force, and count the number of clicks.

Parking brake pedal travel:

7 to 10 notches at 300 N (31 kgf, 67.5 lbf)


If the parking brake pedal travel is not as specified, adjust the parking brake shoe clearance and parking brake pedal travel.


Hide 2.ADJUST PARKING BRAKE PEDAL TRAVEL

a.

Completely release the parking brake pedal.


b.
C247507
0.844,1.448 1.385,1.448 false 0.74,1.406 0.354,1.406 false 1.406,1.354 1.708,1.604 0.302,0.25 10 false *1 0.198,1.313 0.49,1.552 0.292,0.24 10 false *2
*1 Lock Nut
*2 Adjusting Nut


Loosen the lock nut and the adjusting nut to completely release the parking brake cable.


c.

Remove the rear wheels.


d.

Temporarily install the hub nuts to the hub bolts.

HINT:

Securely install the hub nuts to the rear disc.



e.

Remove the parking brake shoes adjusting hole plug.


f.
C239414
1.833,0.406 1.833,0.385 false
V100135

Expand
V100136

Contract


Turn the shoe adjuster and expand the shoes until the disc locks.


g.

Turn and contract the shoe adjuster until the disc can rotate smoothly.

Standard:

Returns 8 notches.



h.

Check that there is no brake drag against the shoes.


i.

Install the parking brake shoe adjusting hole plug.


j.

Turn the adjusting nut until the parking brake pedal travel is corrected to be within the specified range.

Parking brake pedal travel:

7 to 10 notches at 300 N (31 kgf, 67.5 lbf)



k.

Using a wrench or an equivalent tool, hold the adjusting nut and tighten the lock nut.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


l.

Operate the parking brake pedal 3 to 4 times, and check the parking brake pedal travel.


m.

Check that the parking brake does not drag.


n.

Remove the hub nuts from the hub bolts.


o.

Install the rear wheels.

Torque:
103 N*m (1049 kgf*cm, 76 ft.*lbf)


Hide 3.INSPECT BRAKE WARNING LIGHT

a.

When operating the parking brake pedal, check that the brake warning light illuminates.

Standard:

The brake warning light always illuminates at the first click.