Home › Audio / Visual / Telematics › AUDIO / VIDEO › STEREO COMPONENT AMPLIFIER
RM2040EQ _56 Audio / Visual / Telematics _014716 AUDIO / VIDEO _0075008 STEREO COMPONENT AMPLIFIER A

AUDIO / VIDEO  STEREO COMPONENT AMPLIFIER  INSTALLATION  


PROCEDURE

Hide 86280 1.INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY

Hide 86285 2.INSTALL NO. 1 AMPLIFIER BRACKET

a.

Install the No. 1 amplifier bracket with the 2 screws.


Hide 86286 3.INSTALL NO. 2 AMPLIFIER BRACKET

a.

Install the No. 2 amplifier bracket with the 2 screws.


Hide 4.INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET

a.

Engage the 2 guides to the vehicle body to temporarily install the stereo component amplifier assembly with bracket.


b.

Install the stereo component amplifier assembly with bracket with the bolt.


c.

Engage the clamp.


d.

Connect each connector.


e.

Connect the ground wire with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 86183D 5.INSTALL AUDIO AMPLIFIER COVER

a.

Install the audio amplifier cover with the 2 clips.