Home › Power Source / Network › 2AR-FXE BATTERY / CHARGING › AUXILIARY BATTERY
RM2040EQ _57 Power Source / Network _014719 2AR-FXE BATTERY / CHARGING _0075036 AUXILIARY BATTERY A

2AR-FXE BATTERY / CHARGING  AUXILIARY BATTERY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL AUXILIARY BATTERY

a.

Install the auxiliary battery.


b.

Install the auxiliary battery clamp with the bolt and nut.

Torque:
Nut : 5.4 N*m (55 kgf*cm, 48 in.*lbf)
Bolt : 5.4 N*m (55 kgf*cm, 48 in.*lbf)


c.

Connect the auxiliary battery hose.

HINT:

Push in the auxiliary battery hose to the auxiliary battery until a click sound is heard.



d.

Connect the positive (+) auxiliary battery cable with the nut.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


e.

Install the auxiliary battery terminal cover.


Hide 2.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

a.

Connect the negative battery terminal with the nut.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



Hide 64718C 3.INSTALL LUGGAGE TRIM SERVICE HOLE COVER

a.

Engage the claw to connect the luggage trim service hole cover.