Home › Power Source / Network › 2AR-FXE BATTERY / CHARGING › AUXILIARY BATTERY
RM2040EQ _57 Power Source / Network _014719 2AR-FXE BATTERY / CHARGING _0075036 AUXILIARY BATTERY A

2AR-FXE BATTERY / CHARGING  AUXILIARY BATTERY  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 64718C 2.REMOVE LUGGAGE TRIM SERVICE HOLE COVER

a.
A259067

Disengage the claw to remove the luggage trim service hole cover.


Hide 3.DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 4.REMOVE AUXILIARY BATTERY

a.
A259051

Open the auxiliary battery terminal cap.


b.

Loosen the nut, and disconnect the positive (+) auxiliary battery cable.


c.

Disconnect the auxiliary battery hose.


d.

Loosen the nut, and remove the bolt.


e.

Remove the auxiliary battery clamp.


f.

Remove the auxiliary battery.