Home › Vehicle Interior › DOOR LOCK › FRONT DOOR LOCK
RM2040EQ _58 Vehicle Interior _014722 DOOR LOCK _0075046 FRONT DOOR LOCK G

DOOR LOCK  FRONT DOOR LOCK  INSPECTION  


PROCEDURE

Hide 69030A 1.INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY RH

a.
B171378
2.875,3.823 2.875,3.156 2.875,3.156 3.042,3.156 false 2.083,3.823 2.083,3.156 2.083,3.156 2.25,3.156 false 0.073,0.063 0.344,0.281 0.271,0.219 10 false *a 1.156,3.635 1.438,3.875 0.281,0.24 10 false *c 0.615,3.229 0.844,3.458 0.229,0.229 10 false *b 3.063,3.073 3.344,3.313 0.281,0.24 10 false UL 2.271,3.073 2.458,3.271 0.188,0.198 10 false L
*a Component without harness connected
(Front Door Lock with Motor Assembly RH)
*b Unlock
*c Lock


Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor.

OK:
Connection Result
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 1 (UL)
Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 4 (L)
Unlocks


If the result is not as specified, replace the front door lock with motor assembly RH.



b.
B273325
2.302,3.76 2.302,4.125 2.302,4.125 2.177,4.125 false 2.458,3.76 2.458,4.125 2.458,4.125 2.573,4.125 false 0.073,0.052 0.333,0.292 0.26,0.24 10 false *a 1.104,3.177 1.354,3.385 0.25,0.208 10 false *c 0.573,2.75 0.792,2.927 0.219,0.177 10 false *b 2.042,4.042 2.24,4.24 0.198,0.198 10 false E 2.615,4.031 3.115,4.25 0.5,0.219 10 false LSSR
*a Component without harness connected
(Front Door Lock with Motor Assembly RH)
*b Unlock
*c Lock


Check the operation of the door unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (LSSR) - 8 (E) Locked 10 kΩ or higher
7 (LSSR) - 8 (E) Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock with motor assembly RH.



c.
B284859
0.75,3.427 0.75,4.438 0.75,4.438 0.906,4.438 false 1.052,3.427 1.052,4.135 1.052,4.135 1.208,4.135 false 1.208,3.427 1.208,3.823 1.208,3.823 1.365,3.823 false 0.958,4.354 1.177,4.563 0.219,0.208 10 false E 1.26,4.042 1.479,4.26 0.219,0.219 10 false L 1.406,3.729 1.688,3.948 0.281,0.219 10 false UL 0.083,0.031 0.313,0.281 0.229,0.25 10 false *a 0.604,1.615 0.813,1.833 0.208,0.219 10 false *b 0.344,0.51 0.563,0.74 0.219,0.229 10 false *c
*a Component without harness connected
(Front Door Lock with Motor Assembly RH)
*b Lock
*c Unlock


Check the operation of the door key lock and unlock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (L) - 8 (E) Locked Below 1 Ω
6 (L) - 8 (E) off 10 kΩ or higher
5 (UL) - 8 (E) Unlocked Below 1 Ω
5 (UL) - 8 (E) off 10 kΩ or higher


If the result is not as specified, replace the front door lock with motor assembly RH.



Hide 69040A 2.INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH

a.
B171377
1.396,3.802 1.396,3.052 1.396,3.052 1.208,3.052 false 0.594,3.802 0.594,3.052 0.594,3.052 0.406,3.052 false 2.146,3.552 2.354,3.76 0.208,0.208 10 false *c 2.677,3.198 2.865,3.385 0.188,0.188 10 false *b 0.083,0.094 0.302,0.344 0.219,0.25 10 false *a 0.281,2.969 0.469,3.156 0.188,0.188 10 false L 1,2.969 1.271,3.167 0.271,0.198 10 false UL
*a Component without harness connected
(Front Door Lock with Motor Assembly LH)
*b Unlock
*c Lock


Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor.

OK:
Connection Result
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 1 (UL)
Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 4 (L)
Unlocks


If the result is not as specified, replace the front door lock with motor assembly LH.



b.
B171377
1.073,4.198 1.073,4.552 1.073,4.552 1.313,4.552 false 0.906,4.198 0.906,4.552 0.906,4.552 0.708,4.552 false 2.167,3.563 2.385,3.76 0.219,0.198 10 false *c 2.688,3.198 2.969,3.406 0.281,0.208 10 false *b 0.083,0.094 0.323,0.313 0.24,0.219 10 false *a 1.333,4.458 1.563,4.625 0.229,0.167 10 false E 0.229,4.458 0.698,4.635 0.469,0.177 10 false LSSR
*a Component without harness connected
(Front Door Lock with Motor Assembly LH)
*b Unlock
*c Lock


Check the operation of the door unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (E) - 8 (LSSR) Locked 10 kΩ or higher
7 (E) - 8 (LSSR) Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock with motor assembly LH.