Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM
RM2040EQ _58 Vehicle Interior _014722 DOOR LOCK _0075052 WIRELESS DOOR LOCK CONTROL SYSTEM U

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM  TERMINALS OF ECU  


CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


B278841
2.302,3.771 2.625,3.979 0.323,0.208 6.323,2.104 6.646,2.313 0.323,0.208 1.938,1.875 2.26,2.083 0.323,0.208 1.948,1.521 2.271,1.729 0.323,0.208 0.313,2.063 0.635,2.271 0.323,0.208 0.427,2.646 0.75,2.854 0.323,0.208 0.313,1.438 0.635,1.646 0.323,0.208 6.323,1.49 6.646,1.698 0.323,0.208 3.979,5.031 4.302,5.24 0.323,0.208 1.198,5.01 1.521,5.219 0.323,0.208 1.854,6.292 2.177,6.5 0.323,0.208 5.01,6.292 5.333,6.5 0.323,0.208 3.5,7.531 3.823,7.74 0.323,0.208 4.76,3.771 5.083,3.979 0.323,0.208 5.823,5.031 6.146,5.24 0.323,0.208 4.25,0.74 4.573,0.948 0.323,0.208 4.125,1.125 4.125,0.844 4.125,0.844 4.24,0.844 false 6.073,1.594 6.323,1.594 false 6.073,2.198 6.323,2.198 false 1.677,1.969 1.938,1.969 false 1.688,1.615 1.948,1.615 false 0.635,2.167 0.865,2.167 false 0.75,2.74 1.031,2.74 false 0.625,1.542 0.865,1.542 false 1.698,0.958 1.927,0.688 1.927,0.688 2.135,0.688 false 1.469,3.063 1.469,1.677 1.469,1.677 1.563,1.677 false 1.479,2.104 1.563,2.104 false 3.552,7.552 3.979,7.823 0.427,0.271 10 false MB 1.271,5.031 1.656,5.313 0.385,0.281 10 false 3C 1.938,6.313 2.375,6.646 0.438,0.333 10 false 3B 5.083,6.313 5.427,6.573 0.344,0.26 10 false 3A 4.052,5.052 4.365,5.385 0.313,0.333 10 false 3D 4.833,3.792 5.198,4.094 0.365,0.302 10 false I13 2.385,3.792 2.813,4.094 0.427,0.302 10 false I12 6.396,2.115 6.688,2.344 0.292,0.229 10 false 3A 2.01,1.896 2.417,2.188 0.406,0.292 10 false I12 2.021,1.542 2.438,1.813 0.417,0.271 10 false I13 0.385,2.083 0.781,2.375 0.396,0.292 10 false 3D 0.51,2.667 0.917,2.958 0.406,0.292 10 false 3F 0.385,1.458 0.74,1.708 0.354,0.25 10 false 3C 6.396,1.51 6.708,1.75 0.313,0.24 10 false 3B 5.917,5.052 6.25,5.354 0.333,0.302 10 false 3F 4.313,0.76 4.677,1.01 0.365,0.25 10 false MB 0.24,0.177 0.677,0.5 0.438,0.323 10 false *A 1.406,3.104 1.656,3.313 0.25,0.208 10 false *2 2.188,0.625 2.438,0.833 0.25,0.208 10 false *1
*A Main body ECU (multiplex network body ECU) with 2 connectors - -
*1 Main body ECU (multiplex network body ECU) *2 2 connectors


B282096
2.302,3.771 2.625,3.979 0.323,0.208 6.313,2.083 6.635,2.292 0.323,0.208 2.063,1.958 2.385,2.167 0.323,0.208 2.063,1.615 2.385,1.823 0.323,0.208 0.292,2.063 0.615,2.271 0.323,0.208 0.396,2.677 0.719,2.885 0.323,0.208 0.281,1.438 0.604,1.646 0.323,0.208 6.313,1.521 6.635,1.729 0.323,0.208 3.979,5.031 4.302,5.24 0.323,0.208 1.198,5.01 1.521,5.219 0.323,0.208 1.854,6.292 2.177,6.5 0.323,0.208 5.01,6.292 5.333,6.5 0.323,0.208 3.5,7.542 3.823,7.75 0.323,0.208 4.76,3.771 5.083,3.979 0.323,0.208 5.906,5.052 6.229,5.26 0.323,0.208 4.167,0.75 4.49,0.958 0.323,0.208 4.052,1.135 4.052,0.854 4.052,0.854 4.167,0.854 false 6.052,1.615 6.302,1.615 false 6.063,2.188 6.313,2.188 false 1.813,2.063 2.063,2.063 false 1.823,1.719 2.073,1.719 false 0.604,2.167 0.865,2.167 false 0.719,2.771 1.031,2.771 false 0.604,1.542 0.865,1.542 false 1.771,0.979 2,0.708 2,0.708 2.208,0.708 false 1.604,3.083 1.604,1.479 1.604,1.479 1.708,1.479 false 1.604,1.844 1.698,1.844 false 1.604,2.188 1.708,2.188 false 3.552,7.552 4.031,7.844 0.479,0.292 10 false MB 1.271,5.021 1.906,5.271 0.635,0.25 10 false 3C 1.938,6.313 2.51,6.667 0.573,0.354 10 false 3B 5.083,6.313 5.552,6.625 0.469,0.313 10 false 3A 4.052,5.052 4.615,5.365 0.563,0.313 10 false 3D 4.833,3.792 5.25,4.063 0.417,0.271 10 false I13 2.375,3.792 2.677,3.979 0.302,0.188 10 false I12 6.396,2.094 6.719,2.313 0.323,0.219 10 false 3A 2.135,1.969 2.583,2.25 0.448,0.281 10 false I12 2.135,1.635 2.5,1.865 0.365,0.229 10 false I13 0.385,2.083 0.865,2.385 0.479,0.302 10 false 3D 0.5,2.698 0.854,2.938 0.354,0.24 10 false 3F 0.354,1.458 0.833,1.74 0.479,0.281 10 false 3C 6.385,1.531 6.729,1.76 0.344,0.229 10 false 3B 5.99,5.073 6.302,5.333 0.313,0.26 10 false 3F 4.229,0.771 4.615,1 0.385,0.229 10 false MB 0.25,0.188 0.5,0.396 0.25,0.208 10 false *A 2.26,0.646 2.51,0.854 0.25,0.208 10 false *1 1.656,3.094 1.906,3.302 0.25,0.208 10 false *2
*A Main body ECU (multiplex network body ECU) with 3 connectors - -
*1 Main body ECU (multiplex network body ECU) *2 3 connectors


a.

Disconnect the MB and I12 main body ECU (multiplex network body ECU) connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Tester Connection Wiring Color Terminal Description Condition Specified Condition
MB-11 (GND1) - Body ground - Ground Always Below 1 Ω
I12-3 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
MB-30 (BECU) - Body ground - Auxiliary battery power supply Power switch off 11 to 14 V
MB-29 (ACC) - Body ground - ACC power supply Power switch on (ACC) 11 to 14 V
MB-29 (ACC) - Body ground - ACC power supply Power switch off Below 1 V
MB-31 (ALTB) - Body ground - Auxiliary battery power supply Always 11 to 14 V
MB-32 (IG) - Body ground - IG power supply Power switch on (IG) 11 to 14 V
MB-32 (IG) - Body ground - IG power supply Power switch off Below 1 V

If the result is not as specified, there may be a malfunction in the wire harness.


c.

Reconnect the MB and I12 main body ECU (multiplex network body ECU) connector.


d.

Measure the voltage according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
3B-8 (ACT-) - Body ground GR - Body ground Door lock motor unlock drive output (except driver door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3B-8 (ACT-) - Body ground GR - Body ground Door lock motor unlock drive output (except driver door) Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
3B-3 (ACT+) - Body ground W - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3B-3 (ACT+) - Body ground W - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
3B-4 (ACTD) - Body ground V - Body ground Driver door lock motor unlock drive output Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3B-4 (ACTD) - Body ground V - Body ground Driver door lock motor unlock drive output Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
3C-15 (FLCY) - Body ground L - Body ground Front door LH courtesy light switch input Front door LH open Below 1 V
3C-15 (FLCY) - Body ground L - Body ground Front door LH courtesy light switch input Front door LH closed Pulse generation
I13-19 (FRCY) - Body ground Y - Body ground Front door RH courtesy light switch input Front door RH open Below 1 V
I13-19 (FRCY) - Body ground Y - Body ground Front door RH courtesy light switch input Front door RH closed 11 to 14 V*1
Pulse generation*2
I13-1 (LCTY) - Body ground LG - Body ground Rear door LH courtesy light switch input Rear door LH open Below 1 V
I13-1 (LCTY) - Body ground LG - Body ground Rear door LH courtesy light switch input Rear door LH closed 11 to 14 V*1
Pulse generation*2
I13-6 (RCTY) - Body ground B - Body ground Rear door RH courtesy light switch input Rear door RH open Below 1 V
I13-6 (RCTY) - Body ground B - Body ground Rear door RH courtesy light switch input Rear door RH closed Pulse generation
I13-7 (LSFL) - Body ground V - Body ground Front door LH unlock detection switch input Front door LH unlocked Below 1 V
I13-7 (LSFL) - Body ground V - Body ground Front door LH unlock detection switch input Front door LH locked 11 to 14 V*1
Pulse generation*2
I13-18 (LSFR) - Body ground W - Body ground Front door RH unlock detection switch input Front door RH unlocked Below 1 V
I13-18 (LSFR) - Body ground W - Body ground Front door RH unlock detection switch input Front door RH locked Pulse generation
3A-53 (LSR) - Body ground Y - Body ground Rear door RH unlock detection switch input Rear door RH or LH unlocked Below 1 V
3A-53 (LSR) - Body ground Y - Body ground Rear door RH unlock detection switch input Rear door RH and LH locked 11 to 14 V*1
Pulse generation*2
3C-17 (LSR) - Body ground LG - Body ground Rear door LH unlock detection switch input Rear door LH or RH unlocked Below 1 V
3C-17 (LSR) - Body ground LG - Body ground Rear door LH unlock detection switch input Rear door LH and RH locked 11 to 14 V*1
Pulse generation*2
3D-22 (BZR) - Body ground BE - Body ground Wireless door lock buzzer signal Wireless door lock buzzer off Below 1 V
3D-22 (BZR) - Body ground BE - Body ground Wireless door lock buzzer signal Wireless door lock buzzer on Pulse generation

·

*1: Main body ECU (multiplex network body ECU) with 2 connectors

·

*2: Main body ECU (multiplex network body ECU) with 3 connectors


If the result is not as specified, the main body ECU (multiplex network body ECU) or instrument panel junction block assembly may have a malfunction.



CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


B278932
2.237,0.152 2.574,0.351 0.338,0.199 3.656,0.157 3.994,0.355 0.338,0.199 2.237,0.152 2.574,0.351 0.338,0.199 2.304,0.178 2.579,0.341 0.274,0.163 10 O2 3.724,0.182 3.998,0.346 0.274,0.163 10 I87 4.842,0.157 5.18,0.355 0.338,0.199 4.91,0.182 5.184,0.346 0.274,0.163 10 I86

a.

Disconnect the I86 and I87 certification ECU (smart key ECU assembly) connectors.


b.

Measure the resistance and voltage according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Tester Connection Wiring Color Terminal Description Condition Specified Condition
I86-1 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
I87-5 (+B) - Body ground SB - Body ground Auxiliary battery power supply Always 11 to 14 V
I87-4 (CUTB) - Body ground W - Body ground Dark current cut fuse pin input signal Always 11 to 14 V

If the result is not as specified, there may be a malfunction in the wire harness.



c.

Reconnect the I86 and I87 certification ECU (smart key ECU assembly) connectors.


d.

Measure the voltage according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
I87-16 (IG) - I86-1 (E) LG - W-B IG power supply Power switch on (IG) 11 to 14 V
Power switch off Below 1 V
O2-7 (CSEL) - I86-1 (E) LG - W-B Communication channel switching circuit Power switch off, all doors closed and electrical key transmitter sub-assembly switch not pressed → electrical key transmitter sub-assembly switch pressed → electrical key transmitter sub-assembly switch released Below 1 V → 4.5 to 6.0 V → Below 1 V
O2-6 (RDAM) - I86-1 (E) Y - W-B RF Signal input circuit Power switch off 11 to 14 V pulse generation at regular intervals
O2-15 (RCO) - I86-1 (E) G - W-B Wireless tuner power supply output circuit Power switch off, all doors closed and electrical key transmitter sub-assembly switch not pressed → electrical key transmitter sub-assembly switch pressed Below 1 V → 4.5 to 5.5 V

If the result is not as specified, the certification ECU (smart key ECU assembly) may have a malfunction.




CHECK DOOR CONTROL RECEIVER


B280754
3.448,0.244 3.775,0.429 0.327,0.185 3.476,0.264 3.772,0.411 0.295,0.147 10 O25

a.

Disconnect the O25 door control receiver connector.


b.

Measure the resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Tester Connection Wiring Color Terminal Description Condition Specified Condition
O25-1 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.



c.

Reconnect the O25 door control receiver connector.


d.

Measure the voltage according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
O25-2 (CSEL) - O25-1 (GND) LG - BR Smart system receiving channel switching signal input Power switch off, all doors closed and electrical key transmitter sub-assembly switch not pressed → electrical key transmitter sub-assembly switch pressed → electrical key transmitter sub-assembly switch released Below 1 V → 4.5 to 6.0 V → Below 1 V
O25-5 (DATA) - O25-1 (GND) Y - BR Smart system recovery code output Power switch off, all doors closed and electrical key transmitter sub-assembly switch not pressed → electrical key transmitter sub-assembly switch pressed → electrical key transmitter sub-assembly switch released Below 1 V → 10 to 16 V → Below 1 V
O25-4 (+5) - O25-1 (GND) G - BR Receive mode switching signal input Power switch off, all doors closed and electrical key transmitter sub-assembly switch not pressed → electrical key transmitter sub-assembly switch pressed Below 1 V → 4.5 to 5.5 V

If the result is not as specified, the certification ECU (smart key ECU assembly) may have a malfunction.