Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SMART ENTRY AND START SYSTEM(for Start Function)
RM2040EQ _58 Vehicle Interior _014723 THEFT DETERRENT / KEYLESS ENTRY _0075054 SMART ENTRY AND START SYSTEM(for Start Function) L

THEFT DETERRENT / KEYLESS ENTRY  SMART ENTRY AND START SYSTEM(for Start Function)  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the cable is reconnected.

System Name See Procedure
Parking Assist Monitor System (Click here)



PRECAUTIONS WHEN USING INTELLIGENT TESTER


a.

When using the intelligent tester with the power switch off to troubleshoot the smart entry and start system (for Start Function):

Connect the intelligent tester to the DLC3 and turn a door courtesy light on and off at 1.5-second or less intervals until communication between the intelligent tester and vehicle begins (the intelligent tester screen changes when communication begins).



PRECAUTION FOR REGISTRATION


a.

If replacing any of the following parts, refer to the Service Bulletin.

i.

Certification ECU (smart key ECU assembly)


ii.

Steering lock ECU (steering lock actuator assembly)


iii.

Electrical key transmitter sub-assembly