Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SMART ENTRY AND START SYSTEM(for Start Function)
RM2040EQ _58 Vehicle Interior _014723 THEFT DETERRENT / KEYLESS ENTRY _0075054 SMART ENTRY AND START SYSTEM(for Start Function) D

THEFT DETERRENT / KEYLESS ENTRY  SMART ENTRY AND START SYSTEM(for Start Function)  DIAGNOSIS SYSTEM  


DESCRIPTION


a.

Smart entry and start system (for start function) data and the Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.




INSPECT AUXILIARY BATTERY VOLTAGE


a.

Measure the auxiliary battery voltage.

Standard voltage:

11 to 14 V (power switch off)


If the voltage is below 11 V, recharge or replace the auxiliary battery.