Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM
RM2040EQ _58 Vehicle Interior _014723 THEFT DETERRENT / KEYLESS ENTRY _0075062 ENGINE IMMOBILISER SYSTEM D

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM  DTC CHECK / CLEAR  


HINT:
·

When using the intelligent tester with the power switch off to troubleshoot: Connect the intelligent tester to the DLC3 and turn a courtesy light switch on and off at 1.5 second intervals until communication between the intelligent tester and vehicle begins.

·

Refer to the intelligent tester operator's manual for further details.



CHECK FOR IMMOBILISER DTC


a.

Connect the intelligent tester to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / Entry&Start / DTC.


e.

Check for DTCs.

Body Electrical > Entry&Start > Trouble Codes
50001 125


CHECK FOR POWER MANAGEMENT CONTROL ECU DTC


a.

Connect the intelligent tester to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Powertrain / Hybrid Control / DTC.


e.

Check for DTCs.

Powertrain > Hybrid Control > Trouble Codes
50001 236


CLEAR IMMOBILISER DTC


a.

Connect the intelligent tester to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / Entry&Start / DTC.


e.

Clear the DTCs.

Body Electrical > Entry&Start > Clear DTCs
50002 125


CLEAR POWER MANAGEMENT CONTROL ECU DTC


a.

Connect the intelligent tester to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Powertrain / Hybrid Control / DTC.


e.

Clear the DTCs.

Powertrain > Hybrid Control > Clear DTCs
50002 236