Home › Vehicle Interior › LIGHTING (INT) › RELAY
RM2040EQ _58 Vehicle Interior _014724 LIGHTING (INT) _0075071 RELAY G

LIGHTING (INT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84270Q 1.INSPECT LIGHT CUT RELAY

a.
E222294
1.104,0.938 1.302,0.49 1.302,0.49 1.438,0.49 false 1.063,1.344 1.146,1.75 1.146,1.75 1.344,1.75 false 0.813,1.01 0.938,0.49 0.938,0.49 1.063,0.49 false 0.563,1.281 0.635,1.76 0.635,1.76 0.823,1.76 false 1.458,0.406 1.563,0.563 0.104,0.156 10 false 1 1.375,1.667 1.479,1.823 0.104,0.156 10 false 2 1.094,0.396 1.198,0.552 0.104,0.156 10 false 5 0.844,1.667 0.948,1.823 0.104,0.156 10 false 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the light cut relay.