Be sure to correctly follow the removal and installation procedures for the lower No. 1 instrument panel airbag assembly.
73900
1.INSPECT LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check (Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
Visually check for defects with the lower No. 1 instrument panel airbag assembly installed on the vehicle.
The defects are as follows:
Cuts
Small cracks
Significant discoloration
No defects are found.
If any of the defects is found, replace the lower No. 1 instrument panel airbag assembly with a new one.
73900
2.INSPECT LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check (Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
Visually check for defects with the lower No. 1 instrument panel airbag assembly removed from the vehicle.
The defects are as follows:
Cuts
Small cracks
Significant discoloration
Cracks or other damage to the connector
Deformation or cracks on the instrument panel reinforcement or instrument panel brace
No defects are found.
If any of the defects is found, replace the lower No. 1 instrument panel airbag assembly, instrument panel reinforcement or instrument panel to cowl brace sub-assembly with a new one.