Home › Vehicle Interior › SEAT › POWER SEAT SWITCH(w/o Seat Position Memory System)
RM2040EQ _58 Vehicle Interior _014728 SEAT _0075093 POWER SEAT SWITCH(w/o Seat Position Memory System) A

SEAT  POWER SEAT SWITCH(w/o Seat Position Memory System)  INSTALLATION  


PROCEDURE

Hide 84922B 1.INSTALL FRONT POWER SEAT SWITCH

a.

Install the front power seat switch to the front seat cushion shield with the 3 screws.


Hide 71811D 2.INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)

a.

Connect the front lumbar power seat switch connector.


b.

Connect the connector to the front power seat switch.


c.

Engage the 2 clamps.


d.

Install the wire harness to the wire harness cover.


e.

Engage the 2 claws to close the wire harness cover.


f.

Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.


Hide 71812D 3.INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)

Hide 71867A 4.INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD

a.
B286546

Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.


b.
B286547

Engage the 2 claws to install the front No. 1 seat inner cushion shield to the clip as shown in the illustration.


c.

Install the screw.


Hide 71074S 5.CONNECT SEPARATE TYPE FRONT SEATBACK COVER

Hide 84921A 6.INSTALL RECLINING POWER SEAT SWITCH KNOB

Hide 84921B 7.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB