Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY
RM2040EQ _58 Vehicle Interior _014729 SEAT BELT _0075102 FRONT SEAT INNER BELT ASSEMBLY G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73230 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY RH

a.
B271232
0.208,0.167 0.51,0.479 0.302,0.313 10 false *a
*a Component without harness connected
(Front Seat Inner Belt Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Driver seat belt unfastened Below 1 Ω
2 - 3 Driver seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the front seat inner belt assembly RH.


Hide 73240 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY LH

a.
B271152
1.531,0.406 1.917,0.656 0.385,0.25 1.542,2.823 1.927,3.073 0.385,0.25 0.177,0.104 0.5,0.406 0.323,0.302 10 false *a 1.615,0.448 1.938,0.729 0.323,0.281 10 false N2 1.677,2.865 1.958,3.156 0.281,0.292 10 false B
*a Component without harness connected
(Front Seat Inner Belt Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
N2-3 - B-1 Always Below 1 Ω
N2-2 - B-3 Front passenger seat belt unfastened Below 1 Ω
N2-2 - B-3 Front passenger seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the front seat inner belt assembly LH.