Be sure to follow the correct removal and installation procedures of the rear No. 1 seat outer belt assembly.
73360C
1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)
Visually check for defects with the rear No. 1 seat outer belt assembly installed on the vehicle.
The defects are as follows:
Cuts on the rear No. 1 seat outer belt assembly
Small cracks on the rear No. 1 seat outer belt assembly
Significant discoloration on the rear No. 1 seat outer belt assembly
No defects are found.
If any of the defects is found, replace the rear No. 1 seat outer belt assembly with a new one.
73360C
2.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)
Visually check for defects with the rear No. 1 seat outer belt assembly removed from the vehicle.
The defects are as follows:
Cuts on the rear No. 1 seat outer belt assembly
Small cracks on the rear No. 1 seat outer belt assembly
Significant discoloration on the rear No. 1 seat outer belt assembly
Cracks or other damage to the connector
No defects are found.
If any of the defects is found, replace the rear No. 1 seat outer belt assembly with a new one.