Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT
RM2040EQ _58 Vehicle Interior _014730 HEATING / AIR CONDITIONING _0075111 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  REASSEMBLY  


PROCEDURE

Hide 87103B 1.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY

a.
E238157

Install the blower motor with fan sub-assembly with the 3 screws.


Hide 87130K 2.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY

a.
E238156

Install the No. 1 blower damper servo sub-assembly with the 3 screws.


Hide 87139C 3.INSTALL CLEAN AIR FILTER

a.
E238155

Install the clean air filter as shown in the illustration.


Hide 88899M 4.INSTALL AIR FILTER COVER PLATE

a.
E238153

Engage the 2 claws to install the air filter cover plate.


Hide 87201A 5.INSTALL AIR DUCT SUB-ASSEMBLY

a.
E238152

Engage the 4 claws to install the air duct sub-assembly.


Hide 88539J 6.INSTALL DRAIN COOLER HOSE

a.
E238158
2.01,1.677 1.385,1.396 false 2.646,1.104 2.083,1.656 false 1.167,1.271 1.49,1.542 0.323,0.271 10 false *1 2.677,0.948 3.031,1.208 0.354,0.26 10 false *2
*1 Hose Notch
*2 Blower Case Assembly Rib


Align the hose notch and blower case assembly rib as shown in the illustration and install the drain cooler hose.


Hide 88501 7.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

Hide 88515 9.INSTALL COOLER EXPANSION VALVE