88719A
1.INSTALL AIR CONDITIONER PRESSURE SENSOR
Apply a sufficient amount of compressor oil to a new air conditioning pressure sensor.
ND-OIL 11 or equivalent
Keep the O-ring and O-ring fitting surfaces free of foreign matter.
Do not use any compressor oil other than ND-OIL 11 or equivalent.
Using a 27 mm deep socket wrench, install the new air conditioning pressure sensor.
Do not deform the piping.
Make sure to confirm that the piping does not disengage from the plastic clamp.
Connect the connector.
2. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
3.WARM UP COMPRESSOR
4.INSPECT FOR REFRIGERANT LEAK