87346K
1.INSPECT PTC HEATER RELAY (PTC HTR NO. 1, PTC HTR NO. 2)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Auxiliary battery voltage not applied to terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Auxiliary battery voltage applied to terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the relay.