87201
1.REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY
Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.
55840C
2.REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY
Disengage the 2 claws and 2 guides, and remove the No. 6 heater to register duct assembly as shown in the illustration.
88669A
3.REMOVE COOLER THERMISTOR HOSE
Disengage the clamp and remove the cooler thermistor hose.
88897P
4.REMOVE ASPIRATOR
Disengage the 2 claws and remove the aspirator.
82210K
5.REMOVE AIR CONDITIONING HARNESS ASSEMBLY
Remove the heater packing as shown in the illustration.
Disconnect each connector.
Disengage each clamp and remove the air conditioning harness assembly.
87201F
6.REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY
Disengage the 2 claws and guide, and remove the No. 3 air duct sub-assembly as shown in the illustration.
88515
7.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.
8.REMOVE BLOWER ASSEMBLY WITH COOLER EVAPORATOR SUB-ASSEMBLY
88625
9.REMOVE NO. 1 COOLER THERMISTOR
88501
10.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Remove the No. 1 cooler evaporator sub-assembly from the blower assembly as shown in the illustration.
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
88899L
11.REMOVE COOLING UNIT PARTS
Disengage the 4 claws to remove the cooling unit parts.
87050D
12.REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly.
87107A
13.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
Disengage the 3 claws and remove the heater clamp.
Remove the screw and clamp.
Remove the heater radiator unit sub-assembly as shown in the illustration.
Prepare a drain pan or cloth in case the coolant leaks.
87050C
14.REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly.
87710G
15.REMOVE QUICK HEATER ASSEMBLY
Disengage the 2 clamps.
Remove the screw.
Disengage the guide and remove the quick heater bracket.
Disengage the 2 clamps.
Remove the 2 screws.
Remove the quick heater assembly as shown in the illustration.