84940D
1.INSPECT REAR SUN SHADE SWITCH ASSEMBLY
| *a | Component without harness connected
(Rear Sunshade Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 6 (ECU) - 3 (E2) | Rear sunshade switch pushed | Below 1 Ω |
| 6 (ECU) - 3 (E2) | Rear sunshade switch not pushed | 10 kΩ or higher |