Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD
RM2040EQ _58 Vehicle Interior _014732 INTERIOR PANELS / TRIM _0075132 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  DISASSEMBLY  


PROCEDURE

Hide 55328 1.REMOVE NO. 1 INSTRUMENT PANEL PIN

a.

Remove the 4 screws <C> or <D> and 4 No. 1 instrument panel pins.

B308767


Hide 73960A 2.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

Hide 55845A 3.REMOVE NO. 3 HEATER TO REGISTER DUCT

a.
B308768

Remove the clip.


b.

Remove the 3 screws <C> or <D> and No. 3 heater to register duct.


Hide 55972C 4.REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

a.
B308769

Remove the screw <C> or <D>.


b.

Disengage the 2 claws to remove the No. 2 side defroster nozzle duct.


Hide 55843A 5.REMOVE NO. 1 HEATER TO REGISTER DUCT

a.
B308770

Remove the clip.


b.

Remove the 3 screws <C> or <D> and No. 1 heater to register duct.


Hide 55971C 6.REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

a.
B308771

Remove the screw <C> or <D>.


b.

Disengage the 2 claws to remove the No. 1 side defroster nozzle duct.


Hide 86101 7.REMOVE ANTENNA CORD SUB-ASSEMBLY

Hide 55950G 8.REMOVE DEFROSTER NOZZLE ASSEMBLY

a.
B308772

Remove the 3 screws <C> or <D>.


b.

Disengage the 2 guides to remove the defroster nozzle assembly.


Hide 86860 9.REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

Hide 55844 10.REMOVE NO. 2 HEATER TO REGISTER DUCT

a.
B308773

Remove the 2 screws <C> or <D> and No. 2 heater to register duct.


Hide 55012A 11.REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

a.
B308774

Remove the 2 screws <C> or <D>.


b.

Apply protective tape to the area shown in the illustration.

B308775
2.469,0.656 1.99,1.229 false 2.521,0.49 3.01,0.76 0.49,0.271 10 false *1
*1 Protective Tape - -



c.

Disengage the 5 clips as shown in the illustration.


d.

Using a moulding remover, disengage the 8 clips to remove the No. 2 instrument panel garnish sub-assembly as shown in the illustration.