Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH
RM2040EQ _59 Vehicle Exterior _014733 WINDOW / GLASS _0075136 FRONT PASSENGER SIDE POWER WINDOW SWITCH G

WINDOW / GLASS  FRONT PASSENGER SIDE POWER WINDOW SWITCH  INSPECTION  


PROCEDURE

Hide 84810 1.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY

a.

Check the switch function.

i.
B164433
2.188,2.156 2.396,2.708 false 1.938,2.156 2.063,2.708 false 1.542,2.156 1.448,2.708 false 1.302,2.156 1.104,2.708 false 1.75,2.156 1.75,2.708 false 0.229,0.188 0.417,0.333 0.188,0.146 10 false *a 1.385,2.708 1.542,2.875 0.156,0.167 10 false U 0.979,2.708 1.219,2.906 0.24,0.198 10 false SU 2.396,2.708 2.531,2.896 0.135,0.188 10 false D 1.708,2.708 1.823,2.906 0.115,0.198 10 false B 1.969,2.708 2.25,2.917 0.281,0.208 10 false SD
*a Component without harness connected
(Power Window Regulator Switch Assembly (for Front Passenger Door))


Measure the resistance when the switch is operated according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (D) - 2 (SD) UP Below 1 Ω
3 (B) - 4 (U) Below 1 Ω
1 (D) - 2 (SD) off Below 1 Ω
4 (U) - 5 (SU) Below 1 Ω
4 (U) - 5 (SU) DOWN Below 1 Ω
1 (D) - 3 (B) Below 1 Ω


If the result is not as specified, replace the power window regulator switch assembly (for front passenger door).