CHECK DTC
Connect the intelligent tester to the DLC3.
Turn the power switch to on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / D-Door Motor / DTC.
Check the details of the DTC(s) (See page Vehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>DIAGNOSTIC TROUBLE CODE CHART).
CLEAR DTC
Connect the intelligent tester to the DLC3.
Turn the power switch to on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / D-Door Motor / DTC / Clear.
Clear the DTCs.