Home › Vehicle Exterior › MIRROR (EXT) › POWER MIRROR CONTROL SYSTEM(w/ Memory)
RM2040EQ _59 Vehicle Exterior _014736 MIRROR (EXT) _0075158 POWER MIRROR CONTROL SYSTEM(w/ Memory) L

MIRROR (EXT)  POWER MIRROR CONTROL SYSTEM(w/ Memory)  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system after the cable is reconnected.

System Name See Procedure
Parking Assist Monitor System (Click here)



PRECAUTIONS WHEN USING INTELLIGENT TESTER


a.

When using the intelligent tester with the power switch off to troubleshoot:

Connect the intelligent tester to the vehicle, and turn a courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and the vehicle begins.


b.

After all DTCs are cleared, check if the trouble occurs again 6 seconds after the power switch is turned on (IG).