Ensure that fingers or articles of clothing do not get caught in moving parts when performing this test.
85110
1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY
| *a | Component without harness connected
(Windshield Wiper Motor Assembly) |
Check low speed operation.
Connect an auxiliary battery positive (+) lead to terminal A29-1 (+1) and a negative (-) lead to terminal A29-5 (E), and check that the motor operates at low speed.
Motor operates at low speed.
Check high speed operation.
Connect an auxiliary battery positive (+) lead to terminal A29-4 (+2) and a negative (-) lead to terminal A29-5 (E), and check that the motor operates at high speed.
Motor operates at high speed.
If the result is not as specified, replace the windshield wiper motor assembly.