Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR
RM2040EQ _59 Vehicle Exterior _014737 WIPER / WASHER _0075168 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

a.

for LH Side:

i.
E230006
2.333,0.854 2.333,1.083 false 2.719,0.406 3.031,0.656 0.313,0.25 10 false A 2.25,1.094 2.656,1.344 0.406,0.25 10 false *1 2.719,0.906 3.021,1.177 0.302,0.271 10 false A
*1 Ceramic Dot


Check the stop (park) position.


ii.

Operate the windshield wiper motor assembly.


iii.

Stop the windshield wiper motor assembly operation.


iv.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


OK:

The front wiper stops at the position shown in the illustration.

Area Measurement
A 7.5 mm (0.295 in.)




b.

for RH Side:

i.
E230007
2.177,1.052 2.167,1.271 false 2.583,0.74 2.875,0.979 0.292,0.24 10 false A 2.094,1.281 2.385,1.51 0.292,0.229 10 false *1 2.563,1.198 2.906,1.427 0.344,0.229 10 false A
*1 Ceramic Dot


Check the stop (park) position.


ii.

Operate the windshield wiper motor assembly.


iii.

Stop the windshield wiper motor assembly operation.


iv.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


OK:

The front wiper stops at the position shown in the illustration.

Area Measurement
A 7.5 mm (0.295 in.)