Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR › 2012.02–2015.04
RM2040EQ _59 Vehicle Exterior _014737 WIPER / WASHER _0075170 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  INSTALLATION  


PROCEDURE

Hide 85310 1.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
E245825

Install the windshield washer motor and pump assembly.


b.

Connect the connector.


c.

Connect the washer hose.


Hide 2.ADD WASHER FLUID

a.

Add washer fluid to the washer jar.


Hide 53875A 3.INSTALL FRONT FENDER LINER RH

a.

Install the front fender liner RH with the 4 clips and 5 screws.


b.

Install 2 new grommets.


c.
E245822C01
1.802,1.76 1.01,1.76 false 1.844,1.99 1.031,2.063 false 1.021,2.396 1.344,2.625 0.323,0.229 10 false *a 1.875,2.396 2.198,2.656 0.323,0.26 10 false *b 0.833,1.656 1.146,1.896 0.313,0.24 10 false *1 0.844,1.958 1.281,2.229 0.438,0.271 10 false *2
*1 Clip
*2 Pin Hold Clip
*a Correct
*b Incorrect


Install the pin hold clip as shown in the illustration.

NOTICE:

Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.



d.

Install the clip.


Hide 53851Z 4.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

a.

Install the front wheel opening extension pad RH with the 3 screws