Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY › 2012.02–2015.04
RM2040EQ _59 Vehicle Exterior _014738 LIGHTING (EXT) _0075175 HEADLIGHT ASSEMBLY A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 81610F 1.INSTALL CLEARANCE LIGHT BULB

a.

Install the clearance light bulb to the socket.


b.
E234034

Connect the socket with the clearance light bulb as shown in the illustration.


Hide 81510C 2.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.

Install the front turn signal light bulb to the front turn signal light socket.


b.
E234032

Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration and install them as a unit.


Hide 81110D 3.INSTALL NO. 2 HEADLIGHT BULB

a.
E234030

Install the No. 2 headlight bulb to the socket as shown in the illustration.

NOTICE:

Do not touch the bulb glass.



b.
E234028

Turn the socket with the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration and connect them as a unit.

NOTICE:

Do not touch the bulb glass.



Hide 81135C 4.INSTALL NO. 1 HEADLIGHT BACK COVER

a.
E234026

Turn the No. 1 headlight back cover in the direction indicated by the arrow shown in the illustration to install it.


Hide 81110B 5.INSTALL NO. 1 HEADLIGHT BULB

a.
E234024

Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

NOTICE:

Do not touch the bulb glass.



b.
E234022

Engage the claw and connect the connector.


Hide 81135D 6.INSTALL NO. 2 HEADLIGHT BACK COVER

a.
E234021

Turn the No. 2 headlight back cover in the direction indicated by the arrow shown in the illustration to install it.