Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2012.02–2015.04
RM2040EQ _59 Vehicle Exterior _014738 LIGHTING (EXT) _0075178 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 52562F 1.INSTALL REAR BUMPER UPPER SIDE RETAINER

a.
E234050

Engage the claw to install the rear bumper upper side retainer as shown in the illustration.


Hide 81550H 2.INSTALL TAIL AND STOP LIGHT BULB

a.

Install the tail and stop light bulb to the tail and stop light socket.


b.
E234048

Turn the tail and stop light socket with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.


Hide 81550L 3.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear turn signal light socket.


b.
E234046

Turn the rear turn signal light socket with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.


Hide 81562A 4.INSTALL REAR COMBINATION LIGHT GASKET

a.
E234044

Install a new rear combination light gasket.