Home › Vehicle Exterior › HORN › HORN
RM2040EQ _59 Vehicle Exterior _014739 HORN _0075188 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86520 1.INSPECT LOW PITCHED HORN ASSEMBLY

a.
E226259
2.042,1.385 2.188,1.729 false 0.167,0.167 0.667,0.5 0.5,0.333 10 false *a 2.083,1.75 2.542,1.938 0.458,0.188 10 false A1-1
*a Component without harness connected
(Low Pitched Horn Assembly)


Apply an auxiliary battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal A1-1
Auxiliary battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the low pitched horn assembly.