Home › Vehicle Exterior › HORN › RELAY
RM2040EQ _59 Vehicle Exterior _014739 HORN _0075190 RELAY G

HORN  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 86530 1.INSPECT HORN RELAY

a.
E226254
2.896,0.802 3.177,0.802 false 3.188,1.125 2.792,1.125 false 2.021,0.802 2.313,0.802 false 3.188,1.563 2.792,1.563 false 1.896,0.698 2.135,0.958 0.24,0.26 10 false 1 3.229,0.688 3.427,0.958 0.198,0.271 10 false 2 3.229,1.021 3.417,1.26 0.188,0.24 10 false 5 3.229,1.458 3.417,1.688 0.188,0.229 10 false 3

Remove the horn relay.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the horn relay.