Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2012.02–2015.04
RM2040EQ _59 Vehicle Exterior _014740 EXTERIOR PANELS / TRIM _0075191 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)

a.
B293806

Disengage the 2 clamps.


b.

Disconnect the 2 connectors and remove the No. 2 luggage room wire.


Hide 89348J 2.REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

Hide 89341A 3.REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89348 4.REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 52576 5.REMOVE REAR BUMPER SIDE RETAINER LH

a.
B280046

Remove the 3 screws.


b.

Disengage the 6 claws and remove the rear bumper side retainer LH.


Hide 52575 6.REMOVE REAR BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 61648H 7.REMOVE WHEEL HOUSE REINFORCEMENT LH

a.
B280052

Disengage the clip.


b.

Remove the screw.


c.

Remove the nut and wheel house reinforcement LH.


Hide 61647F 8.REMOVE WHEEL HOUSE REINFORCEMENT RH

HINT:

Use the same procedure as for the LH side.


Hide 52023 9.REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B293805

Remove the 6 nuts and rear bumper reinforcement sub-assembly.