Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING
RM2040EQ _59 Vehicle Exterior _014740 EXTERIOR PANELS / TRIM _0075195 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  REMOVAL  


PROCEDURE

Hide 75862E 1.REMOVE FRONT ROCKER PANEL MOULDING END COVER

Hide 2.REMOVE ROCKER PANEL MOULDING ASSEMBLY

a.

Put protective tape around the rocker panel moulding assembly and door.

B280022
4.74,0.604 5.479,0.115 5.479,0.115 4.729,0.438 true 1.135,0.979 1.948,0.729 1.948,0.729 1.271,1.073 true 5.5,0.031 5.813,0.323 0.313,0.292 10 false *1 1.99,0.635 2.333,0.948 0.344,0.313 10 false *1
*1 Protective Tape - -



b.
B280027

Remove the 2 screws and grommet.


c.
B280026

Remove the screw.


d.
B280023

Remove the 7 clips.


e.
B280025

Remove the screw.


f.
B280024

Disengage the 10 clips and remove the rocker panel moulding assembly.


g.

Remove the 10 clips from the rocker panel moulding.