Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING
RM2040EQ _59 Vehicle Exterior _014740 EXTERIOR PANELS / TRIM _0075198 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


PROCEDURE

Hide 75556C 1.REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING

a.
B280081
0.438,0.823 0.792,1.073 false 0.26,0.74 0.635,1.052 0.375,0.313 10 false *1
*1 Protective Tape


Put protective tape around the center roof drip side finish moulding.


b.
B280082

Using a moulding remover, disengage the 2 clips and remove the center roof drip side finish moulding.

NOTICE:
·

Do not remove the clips.

·

If any clip is damaged or falls out, replace it with a new one.