Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER › 2012.02–2015.04
RM2040EQ _59 Vehicle Exterior _014740 EXTERIOR PANELS / TRIM _0075202 FRONT BUMPER A

EXTERIOR PANELS / TRIM  FRONT BUMPER  REMOVAL  


PROCEDURE

Hide 53111 1.REMOVE RADIATOR GRILLE SUB-ASSEMBLY

Hide 2.REMOVE FRONT BUMPER ASSEMBLY

a.
B311447C01
2.375,1.313 2.115,1.146 true 2.458,1.25 2.708,1.479 0.25,0.229 10 false *1
*1 Protective Tape


Put protective tape around the front bumper assembly.

HINT:

Use the same procedure for the RH side and LH side.



b.
B279838C05
1.833,2.75 2.188,2.75 false 2.24,2.646 2.573,2.906 0.333,0.26 10 false *1
*1 Pin Hold Clip


Using a screwdriver, turn the pins 90 degrees and remove the pin hold clip.

HINT:

Use the same procedure for the RH side and LH side.



c.

Remove the clip.

HINT:

Use the same procedure for the RH side and LH side.



d.
B311448

Remove the 6 screws.


e.
B311449

Disengage the 3 claws.

HINT:

Use the same procedure for the RH side and LH side.



f.

w/ Fog Light:

i.
B311454

Pull back the side of the front bumper assembly as shown in the illustration and disconnect each connector.

NOTICE:

Do not apply excessive force when separating the front bumper assembly.


HINT:

Use the same procedure for the RH side and LH side.




g.
B311450

Using a clip remover, remove the 3 clips.


h.

Remove the front bumper assembly.