Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE › 2012.02–2015.04
RM2040EQ _59 Vehicle Exterior _014740 EXTERIOR PANELS / TRIM _0075204 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body, name plates or emblem excessively.


PROCEDURE

Hide 75431 1.INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Clean the luggage compartment door emblem. (If reusing the luggage compartment door emblem)

i.

Using a heat light, heat the luggage compartment door emblem.


ii.

Remove the double-sided tape from the luggage compartment door emblem.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new double-sided tape to the luggage compartment door emblem.



c.

Install the luggage compartment door emblem.

i.

Using a heat light, heat the vehicle body and luggage compartment door emblem.


ii.

Remove the release paper from the luggage compartment door emblem.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.
B281357

Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.



Hide 75442 2.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Clean the No. 2 luggage compartment door name plate. (If reusing the No. 2 luggage compartment door name plate)

i.

Using a heat light, heat the No. 2 luggage compartment door name plate.


ii.

Remove the double-sided tape from the No. 2 luggage compartment door name plate.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new double-sided tape to the No. 2 luggage compartment door name plate.



c.

Install the No. 2 luggage compartment door name plate.

i.

Using a heat light, heat the vehicle body and No. 2 luggage compartment door name plate.


ii.

Remove the release paper from the No. 2 luggage compartment door name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 2 luggage compartment door name plate.

B280500
4.073,2.448 4.552,2.26 false 0.708,1.677 0.958,1.375 false 3.906,2.365 4.198,2.635 0.292,0.271 10 *1 4.167,1.5 4.417,1.719 0.25,0.219 10 A 5.094,0.896 5.354,1.094 0.26,0.198 10 B 6.635,1.563 6.938,1.823 0.302,0.26 10 C 0.542,1.677 0.854,1.906 0.313,0.229 10 *1
*1 Profile of Luggage Compartment Door Panel - -


Reference Measurement:
Area Measurement
A 49.2 mm (1.94 in.)
B 216.4 mm (8.52 in.)
C 49.1 mm (1.93 in.)




Hide 75443A 3.INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Clean the No. 3 luggage compartment door plate. (If reusing the No. 3 luggage compartment door plate)

i.

Using a heat light, heat the No. 3 luggage compartment door plate.


ii.

Remove the double-sided tape from the No. 3 luggage compartment door plate.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new double-sided tape to the No. 3 luggage compartment door plate.



c.

Install the No. 3 luggage compartment door plate.

i.

Using a heat light, heat the vehicle body and No. 3 luggage compartment door plate.


ii.

Remove the release paper from the No. 3 luggage compartment door plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 3 luggage compartment door plate.

B311445
6.406,2.135 5.969,2.135 false 3.969,1.49 4.26,1.75 0.292,0.26 10 false A 5.469,0.24 5.656,0.51 0.188,0.271 10 false B 6.25,1.083 6.5,1.375 0.25,0.292 10 false C 6.469,2.042 6.781,2.292 0.313,0.25 10 false *1
*1 Profile of Luggage Compartment Door Panel - -


Reference Measurement:
Area Measurement
A 47.3 mm (1.86 in.)
B 186.2 mm (7.33 in.)
C 50.7 mm (2.0 in.)




Hide 75441A 4.INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Clean the No. 1 luggage compartment door name plate. (If reusing the No. 1 luggage compartment door name plate)

i.

Using a heat light, heat the No. 1 luggage compartment door name plate.


ii.

Remove the double-sided tape from the No. 1 luggage compartment door name plate.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new double-sided tape to the No. 1 luggage compartment door name plate.



c.

Install the No. 1 luggage compartment door name plate.

i.

Using a heat light, heat the vehicle body and No. 1 luggage compartment door name plate.


ii.

Remove the release paper from the No. 1 luggage compartment door name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 1 luggage compartment door name plate as shown in the illustration.

B294694
5.469,2.219 5.031,2.219 false 4.104,1.333 4.344,1.563 0.24,0.229 10 false A 5.26,0.219 5.5,0.448 0.24,0.229 10 false B 6.656,1.323 6.896,1.552 0.24,0.229 10 false C 5.51,2.125 5.865,2.365 0.354,0.24 10 false *1
*1 Profile of Luggage Compartment Door Panel - -


Reference Measurement:
Area Measurement
A 153.5 mm (6.04 in.)
B 203 mm (7.99 in.)
C 153.5 mm (6.04 in.)




Hide 75374 5.INSTALL SIDE PANEL EMBLEM (for LH Side)

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Clean the side panel emblem. (If reusing the side panel emblem)

i.

Using a heat light, heat the side panel emblem.


ii.

Remove the double-sided tape from the side panel emblem.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new double-sided tape to the side panel emblem.



c.

Install the side panel emblem.

i.

Using a heat light, heat the vehicle body and side panel emblem.


ii.

Remove the release paper from the side panel emblem.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.

Install the side panel emblem as shown in the illustration.

B294231
6.333,2.344 6.073,2.344 false 3.615,1.313 3.865,1.531 0.25,0.219 10 false A 5.406,0.094 5.708,0.323 0.302,0.229 10 false B 6.531,1.313 6.719,1.583 0.188,0.271 10 false C 6.396,2.25 6.646,2.49 0.25,0.24 10 false *1
*1 Profile of Fender Panel - -


Reference Measurement:
Area Measurement
A 163.0 mm (6.42 in.)
B 241.1 mm (9.49 in.)
C 152.4 mm (6.00 in.)




Hide 75374 6.INSTALL SIDE PANEL EMBLEM (for RH Side)

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Clean the side panel emblem. (If reusing the side panel emblem)

i.

Using a heat light, heat the side panel emblem.


ii.

Remove the double-sided tape from the side panel emblem.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new double-sided tape to the side panel emblem.



c.

Install the side panel emblem.

i.

Using a heat light, heat the vehicle body and side panel emblem.


ii.

Remove the release paper from the side panel emblem.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.

Install the side panel emblem as shown in the illustration.

B294230
3.906,2.323 4.323,2.323 false 3.75,1.344 4,1.615 0.25,0.271 10 false A 4.875,0.156 5.125,0.427 0.25,0.271 10 false B 6.396,1.375 6.646,1.646 0.25,0.271 10 false C 3.729,2.219 4.052,2.448 0.323,0.229 10 false *1
*1 Profile of Fender Panel - -


Reference Measurement:
Area Measurement
A 152.4 mm (6.00 in.)
B 240.9 mm (9.48 in.)
C 163.0 mm (6.42 in.)