CUSTOMIZE POWER WINDOW CONTROL SYSTEM
The following items can be customized.
When the customer requests a change in a function, first make sure that the function(s) can be customized.
Be sure to make notes of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the power switch to on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Customize / Power Window.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Door Key P/W Up | This function is used to close the windows by operating the mechanical key. | OFF | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Door Key P/W Down | This function is used to open the windows by operating the mechanical key. | OFF | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| P/W Down W/ Transmit | This function is used to open the windows using the wireless key transmitter. | OFF | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
Enter the following menus: Body / Main Body / Utility / Customize / Wireless Door Lock.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| P/W Wireless Ope Buzz | This function turns the wireless power window buzzer response on or off. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |