Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2012.02–2015.04
RM2040EQ _58 Vehicle Interior _014725 METER / GAUGE / DISPLAY _0075073 METER / GAUGE SYSTEM W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


a.

Customizing with the intelligent tester

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Customize Setting / Combination Meter / Warning.


v.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.



HINT:

The following items can be customized using the intelligent tester.


Warning
Tester Display Description Default Setting ECU
Key Remind Sound Function to change the cycle of the key remind warning buzzer Slow 00:Normal,01:Slow,10:Fast Combination meter assembly
Driver Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer*1 ON 0:OFF,1:ON Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer*1 ON 0:OFF,1:ON Combination meter assembly
Rear Seatbelt Warning Buzzer Function to turn on/off the rear belt warning buzzer*1 ON 0:OFF,1:ON Combination meter assembly
50006 7

*1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more




b.

Customizing with the combination meter assembly

HINT:
·

Press and hold the DISP switch to enter an item.

·

Briefly pressed the DISP switch to enter an item.



i.

Turn the power switch on (IG).


ii.

Select the following menus: SETTINGS.


iii.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.



HINT:

The following items can be customized for the combination meter assembly.


Settings
Combination Meter Assembly Display Default Content Setting Relevant ECU
LANGUAGE ENGLISH Function to change the multi-information display language ENGLISH, FRENCH, SPANISH Combination meter assembly
ECO INDICATOR ON Function to display/not display the current fuel economy display ON or OFF Combination meter assembly
EV INDICATOR ON Function to display/not display the EV indicator ON or OFF Combination meter assembly


iv.

Press and hold the DISP switch.


v.

Return to the item selection screen.