Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › 2012.02–2015.04
RM2040EQ _59 Vehicle Exterior _014738 LIGHTING (EXT) _0075173 LIGHTING SYSTEM W

LIGHTING (EXT)  LIGHTING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE LIGHTING SYSTEM (EXT)


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the intelligent tester

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Customize Setting / Light Control.


v.

Select the setting by referring to the table below.

Light Control
Tester Display Description Default Setting ECU
Response Time Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position Normal 0:Normal,1:Long Main Body ECU (Multiplex Network Body ECU)
Disp Ex ON Sen Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B Normal 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
Disp Ex OFF Sen Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*C Normal 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
Sensitivity Adjusts the sensitivity of the automatic light control system.*A Normal 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 Main Body ECU (Multiplex Network Body ECU)
50006 8
HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


*A

E259624
0.365,0.313 2.042,0.719 1.677,0.406 10 false Sensitivity of the automatic light control system 2.771,0.542 3.385,0.74 0.615,0.198 10 false Dark 6.281,0.542 6.896,0.74 0.615,0.198 10 false Bright 1.083,1.104 1.729,1.333 0.646,0.229 10 false Setting 2.667,1.104 3.313,1.333 0.646,0.229 10 false Dark2 3.521,1.104 4.167,1.333 0.646,0.229 10 false Dark1 4.406,1.104 5.083,1.333 0.677,0.229 10 false Normal 5.333,1.104 6.01,1.333 0.677,0.229 10 false Light1 6.177,1.104 6.76,1.313 0.583,0.208 10 false Light2

*B

E259624
0.344,0.302 2.313,0.698 1.969,0.396 10 false Brightness level required to dim the lights 1.104,1.094 2,1.365 0.896,0.271 10 false Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 false Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 false Bright 2.688,1.115 3.24,1.365 0.552,0.25 10 false Dark2 3.573,1.115 4.125,1.365 0.552,0.25 10 false Dark1 4.396,1.115 5.042,1.344 0.646,0.229 10 false Normal 6.229,1.115 6.781,1.365 0.552,0.25 10 false Light2 5.344,1.115 5.896,1.365 0.552,0.25 10 false Light1

*C

E259624
0.313,0.302 2.427,0.74 2.115,0.438 10 false Brightness level required to cancel the dimming of the lights 1.104,1.094 2,1.365 0.896,0.271 10 false Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 false Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 false Bright 2.719,1.115 3.271,1.365 0.552,0.25 10 false Dark2 3.615,1.115 4.167,1.365 0.552,0.25 10 false Dark1 4.469,1.115 5.021,1.365 0.552,0.25 10 false Normal 6.271,1.115 6.823,1.365 0.552,0.25 10 false Light2 5.375,1.115 5.927,1.365 0.552,0.25 10 false Light1




b.

Customizing with Multi-display (for Navigation Receiver Type)

i.

Turn the power switch on (IG).


ii.

Enter the following menus: SETUP / Vehicle / Vehicle Customization / Light Settings.


iii.

Select the setting by referring to the table below.

Light Settings
Display Default Content Setting Relevant ECU
Light sensor sensitivity 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, 1 or 2 Main Body ECU (Multiplex Network Body ECU)

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


*A

E259624E14
0.365,0.302 2.313,0.708 1.948,0.406 10 false Sensitivity of the automatic light control system 1.104,1.094 2,1.365 0.896,0.271 10 false Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 false Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 false Bright 2.813,1.115 3.115,1.333 0.302,0.219 10 false -2 3.708,1.115 4.052,1.344 0.344,0.229 10 false -1 4.635,1.115 5.031,1.344 0.396,0.229 10 false 0 6.438,1.115 6.844,1.333 0.406,0.219 10 false 2 5.521,1.115 5.948,1.365 0.427,0.25 10 false 1




c.

Customizing with Radio and Display Receiver Assembly (for Radio and Display Type)

i.

Turn the power switch on (IG).


ii.

Enter the following menus: SETUP / Vehicle.


iii.

Select the setting by referring to the table below.

Vehicle Settings
Display Default Content Setting Relevant ECU
Light sensor sensitivity 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, 1 or 2 Main Body ECU (Multiplex Network Body ECU)

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


*A

E259624E14
0.365,0.302 2.313,0.708 1.948,0.406 10 false Sensitivity of the automatic light control system 1.104,1.094 2,1.365 0.896,0.271 10 false Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 false Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 false Bright 2.813,1.115 3.115,1.333 0.302,0.219 10 false -2 3.708,1.115 4.052,1.344 0.344,0.229 10 false -1 4.635,1.115 5.031,1.344 0.396,0.229 10 false 0 6.438,1.115 6.844,1.333 0.406,0.219 10 false 2 5.521,1.115 5.948,1.365 0.427,0.25 10 false 1