DESCRIPTION
Front power seat control system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.
CHECK DLC3
Check the DLC3.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>GENERAL INFORMATION
INSPECT AUXILIARY BATTERY VOLTAGE
Check the auxiliary battery voltage with power switch off.
11 to 14 V
If the voltage is below 11 V, recharge or replace the auxiliary battery.