Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2012.02–2015.04
RM2040EQ _56 Audio / Visual / Telematics _014717 NAVIGATION / MULTI INFO DISPLAY _0078805 NAVIGATION SYSTEM(for HDD) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  B15B8  Harddisk Malfunction  


DESCRIPTION

This DTC is stored when the hard disk drive which is built into the navigation ECU sub-assembly has an initialization malfunction or read/write errors occur more than a specified number of times.

DTC No. Detection Item DTC Detection Condition Trouble Area
B15B8 Harddisk Malfunction Hard Disk Drive (HDD) malfunction Hard disk drive

PROCEDURE

1.CHECK HARD DISK DRIVE (OPERATION CHECK)
a.
E225797

Enter the "HDD Check" screen. Refer to Check Hard Disk Drive in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for HDD)>OPERATION CHECK


b.

Select "HDD Check" and check the result.

OK:

"OK" is displayed.


HINT:

After "HDD Check" is selected, it may take a while until the result is displayed.



Result:
Proceed to
OK
NG



OK

2.CHECK DTC

NG

2.CHECK DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for HDD)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Clear DTCs
50002 212

b.

Recheck for DTCs and check if the same DTC is output again.

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

No DTCs are output.


HINT:

The hard disk drive may be malfunctioning even if DTC B15B8 is not output.



Result:
Proceed to
OK
NG



OK

NG