Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2012.02–2015.04
RM2040EQ _56 Audio / Visual / Telematics _014717 NAVIGATION / MULTI INFO DISPLAY _0078805 NAVIGATION SYSTEM(for HDD) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  Cellular Phone cannot Make Outgoing/Incoming Calls  


PROCEDURE

1.CHECK "Bluetooth" SETTINGS
a.

Check if the cellular phone is registered as a connected device and the "Bluetooth" settings are correct.

OK:

The cellular phone is registered as a connected device and "Bluetooth" settings are correct.



Result:
Proceed to
OK
NG



OK

2.CHECK SETTINGS AND CONDITIONS

NG

SET SETTINGS CORRECTLY

2.CHECK SETTINGS AND CONDITIONS
a.

Check the cellular phone functions.

HINT:

The cellular phone is unable to call under any of the following conditions:

·

The cellular phone is locked.

·

The directory is being transferred.

·

The line is crossed.

·

The cellular phone is outside service range.

·

The power is off.

·

The battery is low.

·

The cellular phone is not connected via "Bluetooth".



OK:

None of the above conditions exist.



Result:
Proceed to
OK
NG



OK

3.CHECK RECEPTION

NG

SET CORRECTLY

3.CHECK RECEPTION
a.

Place the cellular phone close to the navigation ECU sub-assembly.


b.

Set the cellular phone so that it can receive calls.


c.

Check if the cellular phone has reception according to the navigation ECU sub-assembly.

OK:

The cellular phone has reception.



Result:
Proceed to
OK
NG



OK

END

NG

4.CHECK CELLULAR PHONE
4.CHECK CELLULAR PHONE
a.

Check if the cellular phone can make a call.

HINT:

The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.


OK:

Cellular phone can make a call.



Result:
Proceed to
OK
NG



OK

5.RESTART CELLULAR PHONE

NG

REPAIR OR REPLACE CELLULAR PHONE

5.RESTART CELLULAR PHONE
a.

Restart the cellular phone.


b.

Register the cellular phone as a connected device again and check that the malfunction disappears.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END

NG

6.CHECK CELLULAR PHONE
6.CHECK CELLULAR PHONE
a.

Check if the cellular phone is "Bluetooth" compatible.

HINT:

Some versions of "Bluetooth" compatible cellular phones may not function.


OK:

The phone is "Bluetooth" compatible.



Result:
Proceed to
OK
NG



OK

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE