The DTC is stored when the main body ECU (multiplex network body ECU) detects malfunctions in the inner rear view mirror assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B124A | Automatic High Beam Mirror | Malfunction in inner rear view mirror assembly | Inner rear view mirror assembly |
| B124C | Automatic High Beam Camera | Malfunction in camera (inner rear view mirror assembly) | Inner rear view mirror assembly |
First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before performing the following inspection.
Clear the DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR
Check for DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR
DTC B124A or B124C is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG