Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › from 2015.04
RM2040EQ _51 Engine / Hybrid System _014700 CRUISE CONTROL _0166043 LANE DEPARTURE ALERT SYSTEM U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  FAIL-SAFE CHART  


CONDITIONS FOR MOMENTARY STOP


a.
A340591C01
0.99,0.135 1.302,0.333 0.313,0.198 10 false *a 0.365,1.281 0.677,1.479 0.313,0.198 10 false *b
*a Lane Departure Alert Indicator
*b Multi-information Display


When control is stopped momentarily, "LDA not available" is displayed in the combination meter assembly, the lane departure alert indicator turns off and a "pong" sound is heard. This occurs under the following condition:

·

A high lane departure warning camera temperature is detected.


HINT:

When the system recovers and the condition to stop lane departure alert control is not met, the lane departure alert system operates again.




STOP DUE TO SYSTEM MALFUNCTION


a.
A340592C01
1.083,0.146 1.396,0.344 0.313,0.198 10 false *a 0.375,1.281 0.688,1.479 0.313,0.198 10 false *b
*a Lane Departure Alert Indicator
*b Multi-information Display


When a system malfunction is detected, the lane departure alert indicator turns off, "Check LDA System" is displayed in the combination meter assembly and a "pong" sound is heard.

HINT:

After the power switch is turned off then back on (IG), the lane departure alert system operates again if the system is confirmed to be normal when the lane-keeping assist main switch is turned on.