These DTCs are stored when a communication malfunction occurs between the sensors and ECUs.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0101 | Lost Communication with TCM | While the vehicle is being driven at 1 km/h or 1 mph or more, communication between the power management control ECU and lane departure warning camera stops for 5 seconds or more. | ·
CAN communication system ·
Power management control ECU ·
Lane departure warning camera |
| U0123 | Lost Communication with Yaw Rate Sensor Module | While the vehicle is being driven at 1 km/h or 1 mph or more, communication between the airbag sensor assembly (yaw rate sensor) and lane departure warning camera stops for 5 seconds or more. | ·
CAN communication system ·
Airbag sensor assembly (Yaw rate sensor) ·
Lane departure warning camera |
| U0129 | Lost Communication with Brake System Control Module | While the power switch is on (IG), communication between the skid control ECU (brake booster with master cylinder assembly) and lane departure warning camera stops for 5 seconds or more. | ·
CAN communication system ·
Skid control ECU (Brake booster with master cylinder assembly) ·
Lane departure warning camera |
| U0142 | Lost Communication with Body Control Module "B" | While the power switch is on (IG), communication between the main body ECU (multiplex network body ECU) and lane departure warning camera stops for 5 seconds or more. | ·
CAN communication system ·
Main body ECU (Multiplex network body ECU) ·
Lane departure warning camera |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module (Combination Meter) | While the power switch is on (IG), communication between the combination meter assembly and lane departure warning camera stops for 50 seconds or more. | ·
CAN communication system ·
Combination meter assembly ·
Lane departure warning camera |
| U0293 | Lost Communication with Hybrid Control Module | While the power switch is on (IG), communication between the power management control ECU and lane departure warning camera stops for 5 seconds or more. | ·
CAN communication system ·
Power management control ECU ·
Lane departure warning camera |
Clear the DTCs.
Click hereEngine / Hybrid System>CRUISE CONTROL>LANE DEPARTURE ALERT SYSTEM>DTC CHECK / CLEAR
Check for DTCs.
Click hereEngine / Hybrid System>CRUISE CONTROL>LANE DEPARTURE ALERT SYSTEM>DTC CHECK / CLEAR
| Result | Proceed to |
|---|---|
| CAN communication system DTCs are not output | A |
| CAN communication system DTCs are output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING